Full Cassette Retractable Awnings & Sizes

Full cassette retractable awning in the closed position — Full cassette — closed position

01 / Built for everyday patio shade

Control Patio Shade With a Full Cassette Retractable Awning.

We make a full cassette retractable awning that combines the cassette, folding arms, fabric, motor and handheld remote in one system. It suits homes, cafés, restaurants, hotels and shopfronts, as well as distributors and project buyers. Size, fabric and finish are made to order.

Full cassette encloses fabric and folding arms
Aluminum-alloy cassette and arms
Chain arm mechanism
Powder-coated frame; colours made to order
Plain or striped fabric
Motorized with handheld remote as standard
Optional integrated lighting in arms and cassette
Wall mounting or custom overhead mounting
Widths 2–6 m (approx. 6.56–19.69 ft), paired by projection

Send Your Requirements Send Facade Dimensions

02 / Engineering details

Four Engineering Priorities Behind a Made-to-Order Cassette Awning.

We combine full cassette enclosure, fabric selection, motorized control and coordinated mounting to match the awning to your facade.

Open full cassette awning showing fabric and folding arms — Extended position — product view

01 / Full protection

Protect the Fabric and Arms Behind a Clean Facade.

When retracted, the fabric and folding arms close fully into the aluminum cassette. The fabric and mechanism stay protected between uses, and the closed awning sits as one neat line on the facade.

Fabric and arms enclosed when retracted
Aluminum-alloy cassette and folding arms
Closed cassette for a clean facade

Red and white striped awning fabric over a courtyard dining area — Striped fabric — courtyard shade

Plain pale yellow awning fabric above extended folding arms — Plain fabric — pale yellow

Plain red awning fabric above extended folding arms — Plain fabric — red

02 / Fabric choice

Match the Fabric and Colour to Your Outdoor Space.

Choose acrylic awning fabric in a plain colour or striped pattern. We confirm the fabric selection and colour against an approved sample for your order.

Acrylic fabric, plain or striped
Plain colours or striped patterns
Fabric colour approved by sample

Handheld awning remote shown beside an extended gray cassette awning — Motorized shade — handheld control

Chain mechanism at a cassette awning folding arm joint — Folding-arm chain mechanism

03 / Motorized control

Extend and Retract Your Shade With a Handheld Remote.

Electric drive and a handheld remote are standard, with a chain mechanism in the folding arms. Integrated lighting in the arm tubes and cassette base is an optional extra, selected with the order. Manual override or wind/sun sensors can be requested; we confirm compatibility with the selected motor when you order.

Electric drive and handheld remote as standard
Chain mechanism in the folding arms
Optional integrated lighting in arm tubes and cassette base

Wall mounting for a full cassette awning — Wall mounting

Custom overhead mounting for a full cassette awning — Custom overhead mounting

04 / Mounting fit

Fit the Awning to Your Facade and Shade Footprint.

We supply standard wall/face mounting or custom overhead (soffit) mounting. Choose widths of 2–6 m (approx. 6.56–19.69 ft) with projection paired to width: a 3 m projection (approx. 9.84 ft) starts at 4 m width (approx. 13.12 ft). Send the wall material, mounting height and power position so we can coordinate the mounting and operating package.

Standard wall/face or custom soffit mounting
Width and projection selected together
Wall material, mounting height and power position required

03 / Specifications

What widths and projections are available for a full cassette awning?

The full cassette awning is made 2–6 m wide (approx. 6.56–19.69 ft) with 1.5–3.5 m projection (approx. 4.92–11.48 ft), paired by width; 3.5 m on selected models. A 3 m projection (approx. 9.84 ft) starts at 4 m width (approx. 13.12 ft). Custom sizes are made to your drawing; confirm fabric and frame colour by sample.

Item	Standard / Available	Made to order
Size	Width 2–6 m (approx. 6.56–19.69 ft), paired with the selected projection	Custom sizes made to your drawing
Projection	1.5–3.5 m (approx. 4.92–11.48 ft), paired by width; 3.5 m on selected models	Approved width/projection pair on the order drawing
Width / projection pairs	1.5 m projection: 2–6 m wide; 2 m: 3–6 m; 2.5 m: 3.5–6 m; 3 m: 4–6 m; 3.5 m: 4.5–6 m on selected models (0.5 m width steps).
Material	Aluminum-alloy cassette and folding arms with chain mechanism
Enclosure	Full cassette closes around fabric and arms when retracted
Fabric	Acrylic awning fabric, plain or striped	Colour and stripe pattern approved against the selected sample
Finish and colours	Electrostatic powder coating	Frame colour sample and coating specification
Operation	Electric drive with handheld remote	Supply voltage and compatible controls
Mounting	Wall / face mounting	Support-matched overhead or soffit brackets
Lighting	Optional integrated lighting in the arm tubes and cassette base	Selected with the order
Accessories	Mounting brackets and operating hardware	Manual override or wind/sun sensors on request; compatibility confirmed
Packing	Confirm packing requirements with the order	Labels and loading plan by order

04 / Applications and installation

Add Retractable Shade Without Building a Full Roof Structure.

Full cassette awnings provide adjustable facade shade for residential, hospitality, retail and project applications where the fabric should retract into a compact enclosure.

Beige full cassette awning extended beside a residential patio — Beige awning — application example

Blue cassette awning with folding arms above a patio — Blue awning — application example

Striped retractable awning extending over a residential terrace — Striped fabric — terrace application

Application contexts

Use the closest application as the starting point, then confirm the exposure, mounting surface, projection clearance, operating pattern, finish and delivery plan.

Residential patioBalcony and apartmentCafé frontageRestaurant terraceHotel and homestayVilla and gardenRetail storefrontCommercial facadeDistributor product range

Installation formats

Wall or facade mountedBracket route coordinated with the wall material, mounting height and opening.
Overhead or soffit mountedCustom suspended mounting reviewed against the supporting surface and required projection.
Repeated facade programmeApproved sizes, colours and package details repeated across openings or project areas.

05 / How is a full cassette awning installed?

Installation depends on the wall or soffit structure, bracket arrangement and selected awning. Confirm the supporting material and mounting details before lifting the unit into place.

Review the mounting position. Check width, projection, mounting height, clearances and power access.
Confirm the supports and fixings. Have the installer verify the load-bearing surface and model-specific bracket layout.
Secure the brackets and mount the unit. Use the supplied mounting sequence and suitable lifting equipment.
Complete the electrical setup. Use the supplied motor instructions and a qualified electrician for fixed wiring.
Test and hand over. Check extension, retraction, cassette closure and any approved control settings before use.

Before installation: Provide photos of the supporting wall or soffit, measurements and power position. The installer should confirm access, lifting needs and suitable fixing tools from the model-specific instructions.

Installation guidance and drawings are provided; our team helps resolve installation questions.

06 / Order preparation

What mounting information is needed for a quote?

Send the mounting surface, width, projection, bracket positions and site dimensions for review. The order sequence connects the mounting surface, size, fabric, motor, function checks and packing to the same approved cassette awning order.

01Review the application

Facade, use, exposure, quantity, destination and target programme are recorded.

02Confirm dimensions

Width, projection, mounting height, clearances and bracket route are aligned.

03Select the package

Fabric, frame colour, motor, controls and hardware are confirmed.

04Assemble and check

Cassette closure, arm movement and controls are checked to the order scope.

05Protect and identify

Long components and packages are protected and labelled for the shipment plan.

Cassette awning buyer questions

What Should Buyers Confirm Next?

What sizes do full cassette awnings come in?

Full cassette awnings come in widths of 2–6 m (approx. 6.56–19.69 ft) and projections of 1.5–3.5 m (approx. 4.92–11.48 ft), paired by width; 3.5 m on selected models. The listed width/projection combinations use 0.5 m (approx. 1.64 ft) width steps. Custom sizes are made to your drawing, with fabric, frame colour and controls confirmed for the order.

Can a 2 m (approx. 6.56 ft) wide awning have a 3 m (approx. 9.84 ft) projection?

For a 2 m width (approx. 6.56 ft), the listed pairing is a 1.5 m projection (approx. 4.92 ft); a 3 m projection (approx. 9.84 ft) starts at 4 m width (approx. 13.12 ft). Select width and projection together from the listed combinations, then send your mounting details and required shade footprint for the order drawing.

What is the difference between a full cassette and semi-cassette awning?

A full cassette encloses both the fabric and folding arms when retracted. Our full cassette combines an aluminum-alloy housing and arms, a chain arm mechanism, awning fabric and motorized operation. For an enclosure comparison, ask for closed-position drawings of both products and check which parts each housing covers before choosing the awning for your facade.

What affects the cost of a full cassette awning?

The price depends on width, projection, fabric, brackets, motor, optional lighting, sensors, quantity and destination. WishOutdoor supplies full cassette awnings factory-direct to distributors, contractors and project buyers, with finishes and operating options coordinated for the order. Send your dimensions, facade details and quantity for a quotation; the initial response comes within 24 hours.

Are retractable awnings waterproof and wind resistant?

A retractable cassette awning provides adjustable patio shade, with rain and wind suitability determined by its fabric, slope, frame, mounting and operating limits. We match the awning package to your site and provide the selected model's operating guidance, including when to retract the cover as conditions change around your outdoor seating area.

Can a full cassette awning be mounted under a soffit?

Yes, overhead or soffit mounting can be made to order, alongside standard wall mounting. We match the brackets and connection to your supporting structure, mounting height and available space, with power access arranged for the motorized package so the closed cassette and open shade footprint fit the area below the soffit.

Can I add lighting, wind sensors or manual override to an awning?

Integrated lighting in the arm tubes and cassette base is an optional extra, selected with the order. Manual override or wind/sun sensors are on request, with compatibility confirmed for the selected motor and controls. We record the agreed configuration on the order so the requested accessories and operating details are clear.

Ready to configure the awning range?

Share the Width, Projection, Mounting Surface and Quantity.

Send the facade dimensions, fabric and colour direction, destination and available photos or drawings. The team can organise the cassette, motor, bracket and packing discussion.

Send Your Requirements Discuss on WhatsApp

Target first response: within 24 hours. For urgent orders, contact us via WhatsApp or call +86 137 0291 0241.

Full Cassette Retractable Awnings for Project and Distribution Supply.